Dixon 8VF8-B-E Brass V-Series 1" Snap-Tite x 1" NPTF Unvalved Hydraulic Coupler

Description

Dixon 8VF8-B-E Brass V-Series 1" Snap-Tite x 1" NPTF Unvalved Hydraulic Coupler
Features General purpose hydraulic quick-connect provides superior flow characteristics with built-in reliability Part# P-8VF8-B-E-LS Construction Machined components are manufactured using solid bar stock Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life. Steel componentry is plated using ROHS Compliant Trivalent Chrome. Steel coupler sleeves are hardened to resist deformation and maximize service life. Nitrile (Buna-N) seals are standard All couplers incorporate a PTFE anti-extrusion ring to protect the seal components from dynamic impulse damage. Available Options Contact Dixon for all available option adders Standard seal options include: FKM, EPDM, Steam-EP, FDA FKM, Mil-Nitrile, Fuel Nitrile and Silicone Kalrez seal options include: 4079, 6375 and 7075 Valve options include: Unvalved, tubular, steel, brass and 316 stainless steel Sleeve options include: Sleeve-lock, Flanged and Silicone-flanged Oxy-clean treatment is available Compatibility & Interchange Data Interchangeable to MIL-C-51234 Snap-Tite H and Faster TNV Note Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation. Safety notes WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. Specifications Part Number 8VF8-B-E Material Brass Thread Female NPTF Thread Size 1"- 11-1/2 Maximum OD 1.99" (50.5mm) Body Size 1" Hex 1-13/16" Length 2.10" (53.3mm) Maximum Operating Pressure 3000 PSI (200 bar) Burst Pressure 8200 PSI (560 bar) Temperature Range -40°F to +250°F (-40°C to +121°C) Optional Pkg/Box Qty 10 Weight Lb 1.0200
Top Biz Buy's
Dixon 8VF8-B-E Brass V-Series 1" Snap-Tite x 1" NPTF Unvalved Hydraulic Coupler
Features
General purpose hydraulic quick-connect provides superior flow characteristics with built-in reliability
Part# P-8VF8-B-E-LS
Construction
Machined components are manufactured using solid bar stock
Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Steel coupler sleeves are hardened to resist deformation and maximize service life.
Nitrile (Buna-N) seals are standard
All couplers incorporate a PTFE anti-extrusion ring to protect the seal components from dynamic impulse damage.
Available Options
Contact Dixon for all available option adders
Standard seal options include: FKM, EPDM, Steam-EP, FDA FKM, Mil-Nitrile, Fuel Nitrile and Silicone
Kalrez seal options include: 4079, 6375 and 7075
Valve options include: Unvalved, tubular, steel, brass and 316 stainless steel
Sleeve options include: Sleeve-lock, Flanged and Silicone-flanged
Oxy-clean treatment is available
Compatibility & Interchange Data
Interchangeable to MIL-C-51234
Snap-Tite H and Faster TNV
Note
Minimum burst pressure ratings were established under laboratory conditions using a Static Burst Unit (SBU). For high impulse applications and to meet Det Norske Veritas (DNV) compliance, the burst pressure must be divided by four (4) to ensure a 4:1 safety factor during system operation.
Safety notes
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.
Specifications
Part Number
8VF8-B-E
Material
Brass
Thread
Female NPTF
Thread Size
1"- 11-1/2
Maximum OD
1.99" (50.5mm)
Body Size
1"
Hex
1-13/16"
Length
2.10" (53.3mm)
Maximum Operating Pressure
3000 PSI (200 bar)
Burst Pressure
8200 PSI (560 bar)
Temperature Range
-40°F to +250°F (-40°C to +121°C)
Optional Pkg/Box Qty
10
Weight Lb
1.0200
×
We are not an Authorized Dealer, Authorized Distributor, nor Authorized Representative for any manufacturer and therefore
TopBizBuys, LLC offers no warranties, expressed or implied for any of the products that we sell.
By purchasing this item, buyer agrees that TopBizBuys, LLC is not responsible for any damages or injuries caused by the misuse, improper installation, or failure of the product.
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
ITW 1/4" InLine Fuel Gas Rotary Shut-Off Valve for Briggs & Stratton
ITW 1/4" InLine Fuel Gas Rotary Shut-Off Valve for Briggs & Stratton *Pack of 5*
5/8" 304 Stainless Steel Hex Nylon Insert Lock Nut 5/8-11 *Pack of 400*
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© TopBizBuys
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Seller will pay for return shipping.
Additional Information:
Returns Accepted within 30 days. Must be returned in original condition and unuséd/uninstalled. Buyer may ask for full refund or replacement (if available).
eBay integration
by