-40%
LMI Metering Pump C111-368TI 2.5 GPH, 150 psi, PVC, Manual Control
LMI Metering Pump C111-368TI 2.5 GPH, 150 psi, PVC, Manual Control
LMI Metering Pump C111-368TI 2.5 GPH, 150 psi, PVC, Manual Control
LMI Metering Pump C111-368TI 2.5 GPH, 150 psi, PVC, Manual Control

LMI Metering Pump C111-368TI 2.5 GPH, 150 psi, PVC, Manual Control

$ 528

Availability: 100 in stock
  • Refund will be given as: Money Back
  • Condition: New
  • MPN: C111-368TI
  • Restocking Fee: No
  • Brand: LMI
  • Metering Pump Type: Diaphragm Pump
  • Country/Region of Manufacture: United States
  • All returns accepted: Returns Accepted
  • Maximum Pressure: 150 psi
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 30 Days
  • Maximum Flow Rate: 2.5 GPH

    Description

    LMI Series C Metering Pump.
    2.5 GPH @ 150 PSI, Liquid End 368TI, 115 VAC 50/60 Hz, US Plug.
    Dual Manual Control
    Stroke frequency and stroke length are manually adjustable.
    General Description
    LMI Series C chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity.
    Pump Controls
    Adjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end.
    Drive Assembly
    The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 44 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 20 lbs (9.1 kg).
    Pressure Relief
    To eliminate need for pressure relief valve, Liquifram shall automatically stop pulsating when discharge pressure exceeds pump pressure rating by not more than 35%.
    Materials of Construction
    See Specifications tab. Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic with a glass fiber reinforced polypropylene EPU carrier. All exposed fasteners shall be stainless steel. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly.
    Check Valve, Tubing, Connections
    A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections (on models with tubing connections). A foot valve with integral one piece strainer shall be provided for the suction line (on non-high viscosity models with tubing connections), and an injection check/back pressure valve with 1/2" NPT male connection for the injection point (on models with tubing connections).
    This pump retails for over ,600.00!!!
    Found elsewhere for over ,400!!!
    Save big here!
    not what you are looking for? Check out my other listings